Clarke Wexley 7.2kW Cast Iron & Steel Multi Fuel Stove

BACK TO PRODUCT LIST
BACK TO PRODUCT LIST
PRODUCT NUMBER: 6910148

Product description

The Clarke Wexley multi-fuel stove has a modern design with a large glass aperture offering an improved view of the full flame effect and adding a warmer ambience to your room. The air wash system helps to keep the inside of the glass clean.

The Wexley is manufactured from steel with a cast iron door, finished with black, heat-resistant paint. It has an external rear inlet to draw fresh air from outside instead of relying on recirculated indoor air.

Please use a flexible flue liner with a diameter of 5" if required.

All Clarke Stoves are built to DEFRA Standards and comply with Eco Design 2022 emissions and efficiency requirements for clean burning (BS/EN13240). If you intend to use this appliance on a barge or boat, it must be installed in accordance with BS 8511:2010 - consult your qualified installer.

It is recommended that a carbon monoxide detector is installed in accordance with BS/EN 50292:2002

The Wexley has been exempted under section 21 of the Clean Air Act 1993 for use within UK smoke control areas.

SPECIFICATIONS

  • Suitable for use in smokeless controlled zones to burn wood/logs, eco logs and anthracite
  • Heat output up to 7.2kW
  • Energy Rating: A+
  • Built to comply with the latest EN13240 Standards
  • Dimensions (WxDxH) mm: 493x455x623
  • Door Opening (WxD) mm: 360x400
Technical specification
Product manual
PART NUMBER: 6910148

Product description

The Clarke Wexley multi-fuel stove has a modern design with a large glass aperture offering an improved view of the full flame effect and adding a warmer ambience to your room. The air wash system helps to keep the inside of the glass clean.

The Wexley is manufactured from steel with a cast iron door, finished with black, heat-resistant paint. It has an external rear inlet to draw fresh air from outside instead of relying on recirculated indoor air.

Please use a flexible flue liner with a diameter of 5" if required.

All Clarke Stoves are built to DEFRA Standards and comply with Eco Design 2022 emissions and efficiency requirements for clean burning (BS/EN13240). If you intend to use this appliance on a barge or boat, it must be installed in accordance with BS 8511:2010 - consult your qualified installer.

It is recommended that a carbon monoxide detector is installed in accordance with BS/EN 50292:2002

The Wexley has been exempted under section 21 of the Clean Air Act 1993 for use within UK smoke control areas.

OTHER PRODUCTS IN THIS RANGE

Clarke Buckingham II 5.1kW Cast Iron Multi Fuel Stove
Clarke Buckingham II 5.1kW Cast Iron Multi Fuel Stove
Clarke Carlton III 4.2kW Cast Iron Wood Burning Stove
Clarke Carlton III 4.2kW Cast Iron Wood Burning Stove
Clarke Barrel III 5kW Cast Iron Wood Burning Stove
Clarke Barrel III 5kW Cast Iron Wood Burning Stove
Clarke Regal IV 7.9kW Cast Iron Wood Burning Stove
Clarke Regal IV 7.9kW Cast Iron Wood Burning Stove
Clarke Pembroke II 11.9kW Steel Multi Fuel Stove
Clarke Pembroke II 11.9kW Steel Multi Fuel Stove

Technical specification

Heat Output kW Burning Wood (Approx)
7.2 kW
Flue Connector Required
5"
Use Flue Pipe
5 "
Fuel
Multi Fuel
Outlet Location
Top & Rear
Please note that details and specifications contained herein, are correct at the time of publishing. We reserve the right to change specifications at any time without prior notice.

We use cookies to analyse and personalise your experience on our website and to help improve its performance.

To learn more about how we use cookies, please see in our cookie policy.