Clarke Richmond II 8kW Cast Iron Wood Burning Stove

PRODUCT NUMBER: 6909951

Product description

The Richmond II wood burning stove is a classically designed cast-iron stove providing a traditional sense of style to your home with real flames, offering a warm ambience to your room.

The Richmond II is manufactured with a cast-iron body, finished with black, heat-resistant paint and features a pedestal base for raising the fuel bed height. It has air control for altering the burn rate/heat output and has a simple to use pull handle system that moves the riddling grate to push soot and dirt into the ash pan for easier cleaning. The air wash system helps to keep the inside of the glass clean so you can benefit from the full flame effect.

Please use a flexible flue liner with a diameter of 6" (156mm) if required.

All Clarke Stoves are built to Defra Standards and comply with Eco Design 2022 emissions and efficiency requirements for clean burning (BS/EN13240). If you intend to use this appliance on a barge or boat it must be installed in accordance with BS 8511:2010 - consult your qualified installer.

It is recommended that a carbon monoxide detector is installed in accordance with BS EN 50292:2002

The Richmond II Stove has been exempted under section 21 of the Clean Air Act 1993 for use within UK smoke control areas.

SPECIFICATIONS

  • Suitable for burning wood/logs
  • Classically designed cast-iron stove
  • Energy Rating: A
  • Heat output up to 8.0kW
  • Built to comply with the latest EN13240 and ECO2022 Standards
  • Dimensions (WDH) mm:550x473x690
  • Height inc. flue collar mm:740
  • Door Opening (WD) mm:365x360
  • Door Glass Aperture (WH) mm:322x261
  • Weight: 120kg
Technical specification
PART NUMBER: 6909951

Product description

The Richmond II wood burning stove is a classically designed cast-iron stove providing a traditional sense of style to your home with real flames, offering a warm ambience to your room.

The Richmond II is manufactured with a cast-iron body, finished with black, heat-resistant paint and features a pedestal base for raising the fuel bed height. It has air control for altering the burn rate/heat output and has a simple to use pull handle system that moves the riddling grate to push soot and dirt into the ash pan for easier cleaning. The air wash system helps to keep the inside of the glass clean so you can benefit from the full flame effect.

Please use a flexible flue liner with a diameter of 6" (156mm) if required.

All Clarke Stoves are built to Defra Standards and comply with Eco Design 2022 emissions and efficiency requirements for clean burning (BS/EN13240). If you intend to use this appliance on a barge or boat it must be installed in accordance with BS 8511:2010 - consult your qualified installer.

It is recommended that a carbon monoxide detector is installed in accordance with BS EN 50292:2002

The Richmond II Stove has been exempted under section 21 of the Clean Air Act 1993 for use within UK smoke control areas.

Technical specification

Heat Output kW Burning Wood (Approx)
8.0 kW
Use Flue Pipe
6 "
Fuel
Wood
Outlet Location
Top & Rear
Please note that details and specifications contained herein, are correct at the time of publishing. We reserve the right to change specifications at any time without prior notice.