Clarke Pembroke II 11.9kW Steel Multi Fuel Stove

BACK TO PRODUCT LIST
BACK TO PRODUCT LIST
PRODUCT NUMBER: 6909953

Product description

The Pembroke II Multi Fuel Stove is a contemporary designed stove providing a traditional sense of style to your home with real flames offering a warm ambience to your room.

The Pembroke II is manufactured with a solid steel body, cast iron door and finished with black, heat resistant paint. It has air control for altering the burn rate/heat output and has a simple to use pull handle system that moves the riddling grate to push soot and dirt into the ash pan for easier cleaning. The air wash system helps to keep the inside of the glass clean so you can benefit from the full flame effect.

Please use a flexible flue liner with a diameter of 5" (127mm) if required.

All Clarke Stoves are built to Defra Standards and comply with Eco Design 2022 emissions and efficiency requirements for clean burning (BS/EN13240). If you intend to use this appliance on a barge or boat it must be installed in accordance with BS 8511:2010 - consult your qualified installer.

It is recommended that a carbon monoxide detector is installed in accordance with BS EN 50292:2002

The Pembroke II Stove has been exempted under section 21 of the Clean Air Act 1993 for use within UK smoke control areas.

SPECIFICATIONS

  • Multi fuel stoves can be used for burning: wood/logs, eco logs, anthracite & briquettes with less than 20% moisture
  • Heat output up to 11.9kW
  • Energy Rating: A
  • Built to comply with the latest EN13240 and ECO2022 Standards
  • Dimensions (WDH) mm:582x396x575
  • Height inc. flue collar mm:625
  • Door Opening (WD) mm:420x390
  • Door Glass Aperture (WH) mm:397x312
  • Weight: 102kg
Technical specification
More information Product manual
PART NUMBER: 6909953

Product description

The Pembroke II Multi Fuel Stove is a contemporary designed stove providing a traditional sense of style to your home with real flames offering a warm ambience to your room.

The Pembroke II is manufactured with a solid steel body, cast iron door and finished with black, heat resistant paint. It has air control for altering the burn rate/heat output and has a simple to use pull handle system that moves the riddling grate to push soot and dirt into the ash pan for easier cleaning. The air wash system helps to keep the inside of the glass clean so you can benefit from the full flame effect.

Please use a flexible flue liner with a diameter of 5" (127mm) if required.

All Clarke Stoves are built to Defra Standards and comply with Eco Design 2022 emissions and efficiency requirements for clean burning (BS/EN13240). If you intend to use this appliance on a barge or boat it must be installed in accordance with BS 8511:2010 - consult your qualified installer.

It is recommended that a carbon monoxide detector is installed in accordance with BS EN 50292:2002

The Pembroke II Stove has been exempted under section 21 of the Clean Air Act 1993 for use within UK smoke control areas.

OTHER PRODUCTS IN THIS RANGE

Clarke Buckingham II 5.1kW Cast Iron Multi Fuel Stove
Clarke Buckingham II 5.1kW Cast Iron Multi Fuel Stove
Clarke Carlton III 4.2kW Cast Iron Wood Burning Stove
Clarke Carlton III 4.2kW Cast Iron Wood Burning Stove
Clarke Barrel III 5kW Cast Iron Wood Burning Stove
Clarke Barrel III 5kW Cast Iron Wood Burning Stove
Clarke Regal IV 7.9kW Cast Iron Wood Burning Stove
Clarke Regal IV 7.9kW Cast Iron Wood Burning Stove
Clarke Richmond II 8kW Cast Iron Wood Burning Stove
Clarke Richmond II 8kW Cast Iron Wood Burning Stove

Technical specification

Heat Output kW Burning Wood (Approx)
11.9 kW
Use Flue Pipe
5 "
Fuel
Multi Fuel
Outlet Location
Top & Rear
Please note that details and specifications contained herein, are correct at the time of publishing. We reserve the right to change specifications at any time without prior notice.

We use cookies to analyse and personalise your experience on our website and to help improve its performance.

To learn more about how we use cookies, please see in our cookie policy.